3 This is a reserved name for the root group. Please use another name.
4 An error occurred that made you unable to add a new group.
5 All Experts
6 The name you gave for the new group is not valid. Please enter a new one and try again.
7 The group name you gave already exists. Please use a unique name.
8 An error occurred that made it unable to delete the group.
10
11 The modification the group could not be done.\nAs a result this group may be left in a state that is unacceptable.\nPlease verify the number of experts in the group.
12 Size the Window with the Keyboard
13 Move the Window with the keyboard
14 Minimize the Window
15 Maximize the Window
16 Close the Window
17 Restore the Window
18 Switch to another Window
19 Configuration changes will affect every occurrence of the %s expert, even those in other groups.
20 Cut the current frame and put it into the clipboard\nCut
21 Paste a frame from the clipboard to a capture buffer\nPaste
22 Copy the current frame into the clipboard\nCopy
23 Toggle the ability to modify the frames for the current window.
24 Open a saved capture file for viewing\nOpen Capture File
25 Close the current active file
26 Save the current file to disk
27 Save the current file under a new name\nFile Save As
28 Print the current file\nPrint
29 Exit the program, closing all files
31 F#: 000000/000000
32 Find this instance of a particular property and value\nFind
33 Find the next instance of a property and value\nFind Next
34 Find the previous instance of a property and value\nFind Previous
35 Go to the next frame\nNext Frame
36 Go to the previous frame\nPrevious Frame
37 Go to a frame number
38 Edit the display filter for this window\nEdit Display Filter
39 Edit the protocol colors for this display window
40 Edit the font used for this display window
41 Edit the names associated with addresses
42 Edit the capture filter\nEdit Capture Filter
43 Edit the capture trigger
44 Edit the size of the capture buffer
45 Edit the names associated with addresses
46 Select the network adapter to use.
47 Edit the time delta, summary line and other display options
48 Toggle whether the display filter is applied.\nToggle Display Filter
50 Offset: 000 (x000)
51 Toggle the safe capture mode
52 Auto assign address names using frame data.
53 Toggle whether vendor names are displayed.
55 L: 000 (x000)
57 There are no frames in the capture buffer to run Experts on.
58 View the capture filter used to capture this file
59 Toggle the Summary pane on/off\nToggle Summary Pane
60 Toggle the Detail pane on/off\nToggle Detail Pane
61 Toggle the Hex pane on/off\nToggle Hex Pane
62 Toggle Zooming in on the current pane\nZoom Pane
63 Toggle the Session Statistics pane on/off\nToggle Session Statistics Pane
64 Toggle the Station Statistics pane on/off\nToggle Station Statistics Pane
65 Toggle the Graph pane on/off\nToggle Graph Pane
66 Toggle the Total Statistics pane on/off\nToggle Total Statistics Pane
67 Start capturing data using the specified capture filters and triggers.\nStart Capture
68 Stop capturing data\nStop Capture
69 Stop capturing data and display the data captured\nStop and View Capture
73 Create a new display window for the current capture\nDisplay Captured Data
74 Clear out the network statistics
75 Toggle whether it is allowable to transmit this view
76 Transmit the currently selected frame
77 Transmit the current capture
79 Unable to load the expert selected.\nNo changes have been made.
81 Unable to set default configuration for
82 Create a duplicate of the active window
83 Close the active window
84 Cascade the open windows
85 Arranges Windows
86 Arranges Windows horizontally
87 Arranges Windows vertically
88 Arrange the icons
89 Close all the open windows
90 Label the active window
91 Identify all Network Monitor installations on the local segment
92 Launch performance monitor
93 Set the default parsers used to interpret the data.
94 Show or hide the toolbar.
95 Save all configuration information for this type of pane.
96 Toggles whether or not to be prompted to save unsaved data.
97 Toggles whether or not friendly names are used.
98 Enables/disables tool tip help for toolbar buttons.
99 Information about this program
100 Bring up contents of Help\nHelp Topics
101 Help on the current selected property
102 Help on using Help
110 Insert a Comment Frame into the Capture
111 Lists the Top Source and Destination Addresses within a Capture
112 Displays the Distribution of Protocols within a Capture
113 Identify network routers in the current capture
114 Identify network routers
115 Given a name, finds the MAC address
116 Launches a post capture analysis expert\nExperts
301 Set the Filter on the listed events.\nFilter
302 Copy the Event Viewer list contents to the clipboard.\nCopy Event Viewer List
303 Save Event Viewer contents to a file.\nSave Events to File
304 Find a string in the Event list\nFind String in Event List
5000
5001 Microsoft Network Monitor
5002 Microsoft Network Monitor Info
5003 Microsoft Network Monitor Error
5004 Microsoft Network Monitor Query
5005 This will discard the old filter, do you wish to continue?
5006 This will discard all changes made, do you wish to continue?
5007 This will delete all of the current node's children, do you wish to continue?
5008 This will clear the screen, do you wish to continue?
5009 Edit Ex&pression...
5010 Change O&perator
5011 Address
5012 Property
5013 Protocol
5014 (Summary)
5015 F#: %d/%d
5016 (Detail)
5017 Off: %d (x%X)
5018 L: %d (x%X)
5019 (Hex)
5020 Display Filter
5021 You must have a property selection in the Detail pane.
5022 Error
5023 Find Frame Expression
5024 Summary
5025 Detail
5026 Hex
5027 %s (%s)
5028 Display Filter
5029 You have no local card with the same MAC type as the capture
5030 Allow Transmit
5031 Select Transmit Network
5032 There are no selected frames.
5033 Transmit Error
5034 Opening Network...
5035 Transmitting frame...
5036 Transmitting frame...Done.
5037 This capture has no frames. Transmit is not allowed.
5038 Transmit Error
5039 You can't close down ALL of the window panes!
5040 Error
5041 You can't close down ALL of the window panes!
5042 Error
5043 You can't close down ALL of the window panes!
5044 Error
5045 There is no help available for this protocol.
5046 Help On Protocol
5047 You must have a property selection in the Detail pane.
5048 Error
5049 There is no help available for this protocol.
5050 Help on Property
5051 Filtering
5052 Warning
5053 Retrieve Remote %s Data?
5054 Not all data for this capture has been retrieved from the remote network. If you don't download the data before disconnecting, you may lose the data. Would you like to retrieve this data now?
5055 # Frames lost when buffer exceeded:
5056 The value you typed in is invalid for this expression.\nWould you like to try again?
5057 Retrieving Remote Network Data
5058 Calculating Top Users
5059 Calculating Protocol Distribution
5060 Network Monitor Experts
5061 Address Database (%ld Entries)
5062 This address already exists!
5063 Close
5064 Address Database (%ld Entries)
5065 Close
5066 Close
5067 Address Database (%ld Entries)
5068 Address Files (*.ADR)
5069 You will lose your changes if you load another address database. Are you sure you want to do this?
5070 Load Address Database
5071 Open Address file...
5072 ADR
5073 Close
5074 Address Database (%ld Entries)
5076 Save Addresses as...
5077 ADR
5078 Save Address Database
5079 This is an invalid %s address.\nA valid %s address is 6 bytes,\n in the form %s.
5080 XXXXXXXXXXXX
5081 This is an invalid %s address.\nA valid %s address is 4 bytes,\n in the form %s.
5082 DDD.DDD.DDD.DDD
5083 This is an invalid %s address.\nA valid %s address is 1-4 byte node and a 6 byte address,\n in the form %s.
5084 XXXXXXXX.XXXXXXXXXXXX
5085 ERROR
5086 You must give a name at least 1 character long.
5087 ERROR
5089 ADR
5090 ADR
5091 Invalid file extension.
5092 Invalid file extension.
5093 Loading Addresses...
5094 *ANY
5095 Any Address will match
5096 *ANY GROUP
5097 Any Address with the Group Bit set will match
5098 The address file %s could not be saved.
5099 This is an invalid %s address.\nA valid %s address is a \n1-10 Digit Network ID and a 1-5 Digit Subnet,\n in the form %s.
5100 DDDDDDDDDD:DDDDD
5101 Name
5102 Address
5103 Comment
5104 Type
5105 Vendor
5106 USER
5107 USER
5108 .df
5109 --->
5110 <---
5111 <-->
5112 Added in order to load a filter.
5113 Added in order to load a filter.
5114 You must select a station!
5115 You must select a station!
5116 You have selected identical source and destination addresses, which may not capture any packets. Do you want to keep this as your selection?
5117 Address Expression
5118 You must select a direction!
5119 You have selected EXCLUDE ANY <-> ANY, which means you will not capture any frames at all. Are you sure you want to do this?
5120 Address Expression
5121 Full
5122 The buffer size is too small.
5123 The buffer size you have requested may cause frames to be dropped due to swapping. Are you sure you want to allocate a buffer of this size?
5124 WARNING
5125 FULL
5126 The frame size is not a valid number. Please enter in a valid number between 32 and 65535.
5127 The buffer size is too large.
5128 You can only have a total of %d address pairs.
5129 You can only have a total of %d Patterns specified.
5130 You can only have a total of %d OR expressions linking patterns.
5131 Capture Filters
5132 Load Capture Filter
5133 cf
5134 The capture filter file %s could not be loaded.
5135 Capture Filters (*.cf)
5136 Save Capture Filter
5137 cf
5138 Save Capture Filter
5139 SAP/ETYPE =
5140 Any SAP or Any ETYPE
5141 Other SAPs or
5142 Other ETYPEs or
5143 NOT
5144 EXCLUDE
5145 INCLUDE
5146 (%s)
5147 (%s)
5148 Offset Topology Header + 0x%X pattern = 0x%s
5149 Offset 0x%X pattern = 0x%s
5150 (Address Pairs)
5151 (Pattern Matches)
5163 Could not find the SAP section of file, so this file cannot be loaded.
5164 Could not find the ETYPE section of file, so this file cannot be loaded.
5165 ANY
5166 ANY GROUP
5167 ANY
5168 Capture Filter file not found or incompatible file.
5169 ANDEXP%d
5170 %s%s or
5171 For security reasons, Windows Server 2003 family's Network Monitor captures only network traffic (frames) sent to or from the local computer, including broadcast and multicast frames. To capture frames sent to or from any computer on the network, use the version of Network Monitor included with Systems Management Server.
5172 %s: %s
5173 DF
5174 Display Filters (*.DF)
5175 Protocol == Any
5176 <-->
5177 You will lose your changes if you load another display filter. Are you sure you want to do this?
5178 Load Display Filter
5180 The specified file does not contain a valid display filter.
5181 Load Display Filter ...
5182 Save Display Filter
5183 This value is not in the range of 0->FFFF.
5184 Hex data must have an even number of digits in order to be byte aligned
5185 Name
5186 Description
5187 DefaultParsers
5188 This option is for advanced users only!\nIf you disable a protocol via this option, you are stopping it from doing any work at all, including recognition of both the protocol AND the protocols that follow it. If you want to do a protocol based filter you should use the Display Filter dialog.\n\nDo you still want to continue?
5194 WARNING
5195 Name
5196 Description
5197 Name
5198 Description
5199 FRAME
5200 ETHERNET
5201 TOKENRING
5202 FDDI
5203 FRAME,ETHERNET,FDDI,TOKENRING,
5204 FRAME
5205 ETHERNET
5206 TOKENRING
5207 FDDI
5208 The system reported no protocol parsers! Please reinstall, Network Monitor requires protocol parsers.
5209 Protocol
5210 Protocol
5211 Comment
5212 Comment
5213 Type
5214 Type
5215 Values
5216 Values
5217 SAP
5218 ETYPE
5219 Other SAPS All other SAPs SAP XXXX
5220 Other ETYPES All other ETYPEs ETYPE XX
5221 You must type in a pattern!
5222 The pattern is longer than 16 bytes!
5223 The pattern is longer than 16 bytes!
5224 All Files (*.*)
5225 Browse for Command To Run On Trigger
5226 Hex patterns must have an even number of digits in order to specify byte values properly.
5227 Performance Monitor is only supported on NT.
5228 Sorry
5229 You cannot change the protocol parsers while viewing data. You must close down all view windows before you will be allowed to change protocol parsers.
5230 Warning
5231 File Open
5232 Help Contents
5233 File Open
5234 Help Contents
5235 You do not have access permissions to start the Network Monitoring service. You will only be able to connect to remote agents for capturing.
5238 The network card driver that Network Monitor is running on does not support loopback. You will not be able to see packets from your local machine. However, you will be able to see all other packets on the network.
5246 Turning off this option means that Network Monitor will let you close windows which contain unsaved data without prompting you to save it. Are you sure you want to do this?
5247 Prompt For Save
5248 You have unsaved entries in your address database, would you like to save them now?
5249 Save Address Database?
5250 Address Files (*.adr)|*.adr||
5252 Save Addresses as...
5253 ADR
5254 Could not create file because of error %d!
5255 The system reported no protocol parsers! Please reinstall, Network Monitor requires protocol parsers.
5257 AddressFile
5258 Local machine
5260 Network Monitor V%d.%d.%d
5263 Network Monitor
5264 default.cf
5265 default.df
5266 %s (built on %s at %s)
5270 This machine is in use!
5271 REMOTE
5272 R
5273 NET
5274 NETWORK
5275 N
5276
5277 CAPTUREFILTER
5278 CF
5279 DISPLAYFILTER
5280 DF
5281 AUTOSTART
5282 AUTOSTOP
5283 BUFFER
5284 BUFFERSIZE
5285 QUICKFILTER
5286 QF
5287 ETHERNET
5288 IP
5289 IPX
5290 TOKENRING
5291 FDDI
5292 The quickfilter address type is unknown.
5293 QuickFilter Error
5294 /%s is an unknown switch. Valid switches are:\n/REMOTE:remotename\n/NET:#\n/CAPTUREFILTER:path\n/DISPLAYFILTER:path\n/QUICKFILTER:type,Address\n/AUTOSTART\n/AUTOSTOP\n/BUFFERSIZE:# bytes
5295 Invalid switch
5296 \My Captures\
5297 \NETMON.INI
5298 %s\default.adr
5299 LOCAL
5300 Attempting to connect to Network Monitor Agent on \\%s...
5301 QuickFilterName
5302 QFN
5303 VINES
5304 The /Remote switch is valid only for full versions of Microsoft Network Monitor (Available in Microsoft System Management Server).
5305 Machine Name
5306 User Name
5307 Current State
5308 Adapter Address
5309 Version
5310 License Number
5311 Unknown query flags (%.4X)
5312 Driver is installed
5313 Running
5314 Capturing
5315 Transmitting
5316 Capturing and Transmitting
5317 Network Monitor user
5318 No other Network Monitor installations were found on this network.
5319 Query Message
5320 Sort Column
5321 Edit Address '
5322 '
5323 Normal
5324 Signal Lost
5325 Hard Error
5326 Soft Error
5327 Beaconing
5328 Lobe Wire Fault
5329 Auto Removal Error
5330 Remote Received
5331 Counter Overflow
5332 All of the captured data was lost.
5333 Capture Data Lost
5334 The ring signal was lost.\n
5335 Internal tokenring hardware error.\n
5336 Internal tokenring software error.\n
5337 Transmit beacon.\n
5338 The ring signal was lost due to a lobe wire fault.\n
5339 The ring signal was lost due to an auto removal error.\n
5340 The ring signal was lost due to a remote status received.\n
5341 Unknown error!\n
5342 \nError 0x%08X\nReceived %02d:%02d:%02d on %02d/%02d/%d
5343 \nReceived %02d:%02d:%02d on %02d/%02d/%d
5344 Tokenring Error!
5345 Unknown Error!
5346 Ethernet Error!
5347 Unknown Error!
5348 FDDI Error!
5349 Capture Stopped. No frames were captured.
5350 Capture Stopped
5351 MS Shell Dlg
5352 Time Elapsed:
5353 Network Statistics
5354 # Frames:
5355 # Broadcasts:
5356 # Multicasts:
5357 # Bytes:
5358 # Frames Dropped:
5359 Network Status:
5360 Captured Statistics
5361 # Frames:
5362 # Frames in Buffer:
5363 # Bytes:
5364 # Bytes in Buffer:
5365 % Buffer Utilized:
5366 # Frames Dropped:
5367 Per Second Statistics
5368 % Network Utilization:
5369 # Frames/second:
5370 # Bytes/second:
5371 # Broadcasts/second:
5372 # Multicasts/second:
5373 Network Card (MAC) Statistics
5374 # Frames:
5375 # Broadcasts:
5376 # Multicasts:
5377 # Bytes:
5378 Network Card (MAC) Error Statistics
5379 CRC Errors:
5380 # Frames Dropped (No Buffers):
5381 # Frames Dropped (Hardware):
5382 % Network Utilization:
5383 Frames Per Second:
5384 Bytes Per Second:
5385 Broadcasts Per Second:
5386 Multicasts Per Second:
5387 Network Address 1
5388 1-->2
5389 1<--2
5390 Network Address 2
5391 Network Address
5392 Frames Sent
5393 Frames Rcvd
5394 Directed Frames Sent
5395 Multicasts Sent
5396 Broadcasts Sent
5397 Bytes Sent
5398 Bytes Rcvd
5399 UNUSED
5400 Capture Window
5401 You are currently capturing. Do you want to stop the capture?
5402 Do you want to save the capture?
5403 Save File
5404 File Open
5405 File Save
5406 Toggle Graph Pane
5407 Toggle Total Statistics Pane
5408 Toggle Session Statistics Pane
5409 Toggle Station Statistics Pane
5410 Zoom Pane
5411 Edit Capture Filter
5412 Start Capture
5413 Pause/Continue Capture
5414 Stop Capture
5415 Stop and View Capture
5416 Display Captured Data
5417 Help Contents
5418 Unsupported
5419 %2.2lu%s%2.2lu%s%2.2lu.%2.3lu
5420 UNKNOWN STAT
5421 Sort Column
5422 Edit Address '
5423 The specified network is invalid: %s
5424 %d entries
5425 '
5426 (Invalid Mac Address)
5427 No Network
5428 The trigger command was in an invalid format for execution.
5429 The trigger command was not found.
5430 The trigger command was not a valid path.
5431 The trigger command failed with unknown error %d.
5432 The pattern has been found.
5433 The specified amount of buffer has been captured.
5434 The pattern has been found, and the specified percentage of buffer has captured.
5435 The specified percentage of buffer has been captured, and the pattern has been found.
5436 The Capture has been stopped.
5437 Trigger
5438 The Capture has been paused.
5439 TRIGGER
5440 The connection to the remote agent has failed.
5441 Remote Agent Error
5442 The network has had an internal reset.
5443 Local Network Error
5444 Freeing old network buffers...
5445 Allocating network buffers...
5446 No buffer could be allocated. You will need to free up memory by shutting down applications and/or windows.
5447 We were only able to allocate a buffer of size %.2f megabytes. Is it OK to use this buffer size?
5448 NOTE
5449 Token Ring
5450 FDDI
5451 Unknown
5452 \\%hs\%s\NET %s
5453 \%s\NET %s
5454 (Total Stats)
5455 (Graph)
5456 (Session Stats)
5457 (Station Stats)
5458 There is no data to save.
5459 Save As
5460 There are no frames to display!
5461 Capture:%d
5462 Capture:%d
5463 You can't close down ALL of the window panes!
5464 Error
5465 You can't close down ALL of the window panes!
5466 Error
5467 You can't close down ALL of the window panes!
5468 Error
5469 You can't close down ALL of the window panes!
5470 Capture file format is invalid.\nFile: %s
5471 Network Monitor cannot capture without a network. The network command has been canceled.
5472 The current data has not been saved yet, do you want to save it?
5473 Save Capture?
5474 No CAPTUREDATA in MDICapture window, or we are already in start state.!\n
5475 You cannot change the protocol parsers while viewing data. You must close down all view windows before you will be allowed to change protocol parsers.
5476 Warning
5477 The current data has not been saved yet, do you want to save it?
5478 Save Capture?
5479 Select Capture Network
5480 The network %d is still capturing data. Do you want to suspend the connection, and leave it capturing?
5481 Suspend?
5482 This network is still capturing data. Are you sure you want to stop capturing?
5483 Close
5484 ?
5485 The current data has not been saved yet, do you want to save it?
5486 Save Capture?
5487 Capture Window
5489 The trigger command was in an invalid format for execution.
5490 The trigger command was not found.
5491 The trigger command was not a valid path.
5492 The pattern has been found.
5493 The specified amount of buffer has been captured.
5494 The pattern has been found, and the specified percentage of buffer has captured.
5495 The specified percentage of buffer has been captured, and the pattern has been found.
5496 The Trigger stopped the Capture.
5497 Trigger
5498 The Trigger paused the Capture.
5499 TRIGGER
5500 The ring signal was lost.\n
5501 Internal tokenring hardware error.\n
5502 Internal tokenring software error.\n
5503 Transmit beacon.\n
5504 The ring signal was lost due to a lobe wire fault.\n
5505 The ring signal was lost due to an auto removal error.\n
5506 The ring signal was lost due to a remote status received.\n
5507 Unknown Tokenring error!\n
5508 \nError 0x%08X\nReceived %02d:%02d:%02d on %02d/%02d/%d
5509 \nReceived %02d:%02d:%02d on %02d/%02d/%d
5510 Tokenring Error!
5511 Your attempt to capture has been denied:\nBy - %s on %hs(%02X%02X%02X%02X%02X%02X)\nReason - %hs
5512 Security Breach
5513 %s *** no description available ***
5514 No match was found.
5515 Find Instance
5516 %s = N/A
5517 %sDefaults
5518 DEFAULTS
5519 You cannot paste while the capture is read only!
5520 This frame has been modified. Do you want to keep the changes?
5521 Out of memory!
5522 %hs.\nProtocol '%hs' of parser DLL '%s' was not found.\nCheck your Parser.ini file.
5523 Offset: %d (x%X)
5524 No frames were found in the capture file. If this was a foreign capture file, this may be caused by the file existing in a compressed form.
5527 Load Message
5528 Protoco&l
5529 &Property...
5530 Frame
5531 Time
5532 Src MAC Addr
5533 Dst MAC Addr
5534 Protocol
5535 Description
5536 Src Other Addr
5537 Dst Other Addr
5538 Type Other Addr
5539 UNUSED
5540 F#: 000000/000000
5541 Off: 000(x000)
5542 L: 000(x000)
5543 F: 0/0
5544 Off: 0(x0)
5545 L: 0(x0)
5546 File Open
5547 File Save
5548 Cut
5549 Copy
5550 Paste
5551 Print
5552 Toggle Summary Pane
5553 Toggle Detail Pane
5554 Toggle Hex Pane
5555 Zoom Pane
5556 Previous Frame
5557 Next Frame
5558 Edit Display Filter
5559 Disable/Enable Filter
5560 Edit Find Frame
5561 Find Previous Frame
5562 Find Next Frame
5563 Help Contents
5564 Do you want to save %s?
5565 Do you want to save the modified file?
5566 Save File
5567 Edit Address '
5568 '
5569 Insert Comment
5570 Resolve address '
5571 DEFAULTS
5572 NoDrvPopup
5573 DEFAULTS
5574 NoDrvPopup
5575 You did not have permissions to the Network Monitoring service. Consult your manual to make sure that you have correctly installed Network Monitor. You will only be able to view previous saved files.
5576 Number
5577 Node Name
5578 Connect State
5579 Type
5580 Current Address
5581 Card Description
5582 Link Speed
5583 Permanent Address
5584 You must select a network.
5585 &Disconnect
5586 &Connect
5587 LOCAL
5588 CONNECTED
5589 DISCONNECTED
5590 CONNECTED
5591 Ethernet
5592 Token Ring
5593 FDDI
5594 Unknown
5595 Printer
5596 Frame
5597 Time
5598 Src MAC Addr
5599 Dst MAC Addr
5600 Protocol
5601 Description
5602 Src Other Addr
5603 Dst Other Addr
5604 Type Other Addr
5605 Edit Display Filter
5606 Printer is unavailable.
5607 Advanced >>
5608 Printer is unavailable.
5609 At least one of the columns must be uncollapsed. Exit the print dialog and readjust your column widths.
5610 PRINT
5611 Frame Number
5612 The file already exists. Do you want to overwrite it?
5613 The expiration date has been reached on this version of Network Monitor. If the support situation has not been resolved, please contact your support representative for more information.
5616 Expiration Error
5617 The expiration date on this product will be reached within 10 days. If the support situation has not been resolved, please contact your support representative for more information.
5620 Expiration Warning
5621 You cannot continue without a password. Quit application?
5622 Warning
5623 Password gives you limited access to Network Monitor features.
5624 Note
5625 Password gives you access to all Network Monitor features.
5626 Admin permissions are required for running Network Monitor on this machine.
5627 Invalid password.
5628 Access Error
5629 Remote Password for %s
5630 on
5631 &Continue
5632 &Continue
5633 &Pause
5634 Value Unknown
5635 %d
5636 &Pause
5637 %d
5638 %d
5639 MS Shell Dlg
5640 Frames transmitted
5641 Due to memory constraints, the system is not able to transmit this large of a capture. Select a smaller range of frames.
5642 The frames to be transmitted have a different MAC type than the selected network.
5643 A transmit error occurred or no frames passed the filter.
5644 An unknown error %ld has occurred.
5645 Error
5646 Save
5647 Courier New
5648 *ANY
5649 *ANY GROUP
5650 The address is not 12 characters long!
5651 The character '%c' is not a valid Address character.
5652 ETHERNET
5653 IP
5654 IPX/XNS
5655 TOKENRING
5656 FDDI
5657 XNS
5658 ANY GROUP
5659 ANY
5660 Load Error
5661 Save Error
5662 The path %s could not be found.
5663 The file %s could not be opened.
5664 Access has been denied to the file %s.
5665 The file %s is write protected.
5666 The device is not ready.
5667 There has been a sharing violation on file %s.
5668 There has been a locking violation on file %s.
5669 There is not enough disk space to save file %s.
5670 Network access has been denied.
5671 The file %s already exists.
5672 The path %s is invalid.
5673 An unhandled system error %d has occurred with file %s.
5674 There are no frames in this capture.
5675 Find All Names
5676 Frame Number
5677 %d names were found in the captured data. %d non-duplicate names were added to the address database.
5678 Find All Names
5679 Frames Being Saved
5680 The From field is not in the valid range of frames.
5681 Save As
5682 The To field is not in the valid range of frames.
5683 Save As
5684 Network Monitor(*.CAP)
5685 Save Data as...
5686 CAP
5687 The file already exists, do you want to overwrite it?
5688 Save
5689 because access is denied
5690 The file cannot be overwritten%s. You will have to save under a different name.
5691 ERROR
5692 There is not enough memory to start the help subsystem.
5693 Help Start Error
5694 The help subsystem could not be started (0x%x).
5695 Help Start Error
5696 The password is incorrect for the remote machine
5697 Remote Password
5698 VINES IP
5699 This command is available only in the version of Network Monitor provided with Microsoft Systems Management Server.
5700 Tool Unavailable
5701 On Win32s only 1 copy of Network Monitor can be run at a time.
5742 Could not print. Please check your printer setup.
5743 All
5744 Text Files
5745 \captures
5746 Get Print Filename
5747 TXT
5748 page %u
5749 Transmit Dialog Error
5750 The frame transmit range is out of bounds.
5751 You must enter a number for the 'number of cycles' field.
5752 --->
5753 <---
5754 <-->
5755 XXXXXXXXXXXX
5756 &Value
5757 Byte
5758 Word
5759 DWord
5760 Array of Bytes
5761 Array of Words
5762 Array of DWords
5763 String
5764 Address
5765 LargeInteger
5766 &Time ( HH:MM:SS.ss )
5767 %s ( %s )
5768 SNMP Object Identifier
5769 *ANY
5770 You have selected identical source and destination addresses, which is not a valid address expression. Do you want to keep this as your selection?
5771 Address Expression
5772 Name
5773 Description
5774 Name
5775 Description
5776 Protocol ==
5777 None
5778 Any
5779 or
5780 includes
5781 ==
5782 <>
5783 >
5784 <
5785 >=
5786 <=
5787 ==
5788 ==
5789 ==
5790 ==
5791 <>
5792 >
5793 <
5794 >=
5795 <=
5796 ==
5797 contains
5798 begins with
5799 ends with
5800 contains
5801 exists
5802 ==
5803 <>
5804 )
5805 Bit 0x%X %s
5806 ON
5807 OFF
5808 Default constant value
5809 Bit 0x%X %s
5810 ON
5811 OFF
5812 BOOKMARK
5813 COMMENT
5814 FRAME NUMBER INVALID
5815 FRAME TYPE INVALID
5817 Count
5818 Name
5819 Address
5820 Other Address
5821 Time
5822 Search type
5823 Proceed to Search Capture
5824 No routers found
5825 Find routers
5826 Network Routers (%d found)
5827 IP
5828 RIP
5829 RIPX
5830 OSPF
5831 %d Networks
5832 %d Addresses
5833 Address
5834 Networks
5835 Show Supplemental Info
5836 SAP
5837 BROWSER
5838 Looking ...
5839 %d Names
5840 Show Addresses
5841 Show Names
5842 Capturing
5843 Invalid buffer size
5844 Invalid capture time
5845 Invalid number of multiples
5846 Processing Capture
5847 Capturing Router Data
5848 Searching the Capture
5849 Router Data
5850 QueryOnClosingRouterDialog
5851 No additional information
5852 SAP Service Names
5853 IP Addresses
5854 RIPX Network Numbers
5855 Browser Name-Address Pairs
5856 OSPF Router ID
5857 Please, input a machine name
5858 Browsing Your Network..
5859 Address Not Found
5860 Problems Fetching Local Information
5861 IP Address:
5862 IPX Address:
5863 MAC Address: %02X %02X %02X %02X %02X %02X
5864 (Ethernet)
5865 (Tokenring)
5866 (FDDI)
5867 Unknown Address Type:
5868 (No Registered Aliases Found)
5869 DNS
5870 SAP
5871 NetBios
5872 Local ADR Database
5873 Resolve Address From Name
5874 You must first select a row
5875 IP Address
5876 IPX Address
5877 Ether
5878 token
5879 FDDI
5880 These address entries already exist! Do you still want to save them?
5881 Type
5882 Address
5883 Please, enter server name
5884 Please, enter database name
5885 Please, enter user name
5886 Login unsuccessful! Try again?
5887 The addresses have been saved
5888 Enabled Services
5889 Disabled Services
5890 These addresses have not been saved. Do you want to save them into the address database?
5891 There is no data to add
5892 Found entries has been added to the local database
5893 Querying DNS..
5894 Querying SAP..
5895 Querying Winsock Services..
5896 Querying Netbios..
5897 Querying Local Address Database..
5898 Querying SMS Database..
5899 Starting Query..
5900 You must enter a valid name
5901 This service requires Windows NT
5902 Could not retrieve machine name
5903 To use SMS Name Resolution, Network Monitor requires that the following SMS DLLs exist in the path:\nBASE.DLL, BASE2.DLL, BASE3.DLL, BASE4.DLL, BASE5.DLL, NTWDBLIB.DLL, OBJECTTY.DLL, SMSAPI.DLL, SMSINST.DLL and SMSMFC.DLL.
5904 Error: DLL Load Failure
5905 Successful login as '%s' on server '\\%s'
5906 Successful Login
5907 INVALID AMOUNT OF USERS TO DISPLAY
5908 Name
5909 Address
5910 Frames
5911 % Frames
5912 % Filtered Frames
5913 Bytes
5914 % Bytes
5915 % Filtered Bytes
5916 Top Sender By
5917 Top Recipient By
5918 %s Number of Frames
5919 %s Number of Bytes
5920 %s, Filter Applied
5921 %s, Filter Ignored
5922 UNKNOWN
5923 Edit Address
5924 List by Bytes
5925 List by Frames
5926 All Protocols in each Frame Calculated
5927 Last Protocol of each Frame Claims the Entire Frame
5928 First Effective Protocol Claims Entire Frame
5929 Protocol
5930 Frames
5931 Bytes Claimed
5932 % Frames
5933 % Bytes
5934 % Filtered Frames
5935 % Filtered Bytes
5936 The operation succeeded.
5937 An error occurred creating a memory-mapped file.
5938 The handle to a filter is invalid.
5939 Capturing has already been started.
5940 Capturing has not been started.
5941 There are no frames available.
5942 The buffer is too small to complete the operation.
5943 No protocol was able to recognize the frame.
5944 File already exists.
5945 A needed device driver was not found or is not loaded.
5946 A MAC-level address already exists in the database.
5947 The frame handle is invalid.
5948 The protocol handle is invalid.
5949 The property handle is invalid.
5950 The object has been locked.
5951 A pop operation was attempted on an empty stack.
5952 A push operation was attempted on an full stack.
5953 There are too many protocols active.
5954 The file was not found.
5955 No memory was available.
5956 A capture is in the paused state.
5957 There are no buffers available or present.
5958 There are already buffers present.
5959 The object is not locked.
5960 A integer type was out of range (i.e. a frame number).
5961 An object was locked too many times.
5962 A parser failed to load.
5963 A parser failed to unload.
5964 The address database handle is invalid.
5965 The MAC address was not found in the database.
5966 The network software was not found in the system.
5967 There is no property database for a protocol.
5968 A property was not found in the database.
5969 The property database handle is in valid.
5970 The protocol has not been enabled.
5971 The protocol DLL could not be found.
5972 The parser DLL is not valid.
5973 There are no properties attached.
5974 There are no frame in the buffer.
5975 The capture file format is not valid.
5976 The OS could not create a temporary file.
5977 There is no MS-DOS memory available.
5978 There are no protocol enabled.
5979 Launch Experts
5980 The Event Viewer cannot be created.\nEventQ.dll cannot be found.
5981 ATM
5982 The MAC type is invalid or unsupported.
5983 There is no routing information present in the MAC frame.
5984 The network handle is invalid.
5985 The network is already open.
5986 The network is not open.
5987 The frame was not found in the buffer.
5989 There are no handles available.
5990 The network ID is invalid.
5991 The capture handle is invalid.
5992 The protocol has already been enabled.
5993 The filter expression is invalid.
5994 A transmit error occurred.
5995 The buffer handle is invalid.
5996 The specified data is unknown or invalid.
5997 The MS-DOS/NDIS 2.0 network driver is not loaded.
5998 The Windows VxD/NDIS 3.0 network driver is not loaded.
5999 The MS-DOS/NDIS 2.0 driver had an init-time failure.
6000 The Windows/NDIS 3.0 driver had an init-time failure.
6001 The network driver is busy and cannot handle requests.
6002 The capture is not paused.
6003 The frame/packet length is not valid.
6005 An internal exception (e.g. a page fault) occurred.
6006 The MAC driver does not support promiscuous mode.
6007 The MAC driver failed to open.
6008 The protocol went off the end of the frame and is faulting.
6009 An asynchronous operation is still pending.
6010 A privileged operation was attempted.
6011 The password handle is invalid.
6012 A bad parameter was detected.
6013 An error occurred reading the file.
6014 An error occurred writing to the file.
6015 The protocol has not been registered
6016 The frame does not contain an IP address.
6017 The transmit request was cancelled.
6018 The operation cannot be performed on a capture with 1 or more locked frames.
6019 A cancel transmit request was submitted but there were no transmits pending.
6020 Path not found.
6021 A windows error has occurred.
6022 The handle to the frame has no frame number.
6023 The frame is not associated with any capture.
6024 The frame is already associated with any capture.
6025 The NAL is not remotable.
6026 The API is not supported
6027 Network Monitor should discard the current frame.
6028 The save has been canceled.
6029 The connection to the remote machine has been lost
6030 The media/mac type is not valid.
6031 The Remote Agent is currently in use
6032 The request has timed out
6053 The capture file is an uplevel version that this version of Network Monitor does not understand.
6055 Text Files (*.txt)|*.txt||
6056 IP/1394
6057 (IP/1394)
6058 The system files do not support capture filters containing IP version 6 addresses.
6059 You cannot access '%s'. This is because Network Monitor is running with reduced access in which administrator privileges have been removed. \n\nTo gain access, add your user name '%s' to the permissions list of this file or folder.
6060 You selected a newly added network interface. You need to stop and restart Network Monitor before performing a capture on this interface.
32768 This is an invalid %s address.\nA valid %s address is 128 bytes,\n in the form %s.
32783 Copy the Selected Row to the Clipboard\nCopy Selected Row
32784 Find text in the Event Viewer list of events.\Find Text in Event List
32785 Change the directory where the driver uses it to store temporary capture files.
32786 Unable to start a router capture
32787 Unable to load the router capture
32788 Unable to copy network information
32789 We need a current name!
32790 Invalid number for duplicate addresses
32791 Unable to load View Menu
32792 You must turn off 'Show Vendor Names' (Options menu) before importing this MAC address..
32793 There were no frames found
32794 Out of Memory\nCannot start the experts.
32795 Please specify the network on which you want to capture data. (If you do not select a network, Network Monitor will select a local network for you.)
32796 Your default network was invalid.\nPlease select a new network. If you do not select a network,\nNetwork Monitor will select one for you.
32797 Network Monitor - Select Default Network
32798 There was a problem with your selection.\nNetwork Monitor will select a network
32799 The current selection has no data associated with it.
32800 Microsoft Network Monitor 2.1 Lite Version
32801 Microsoft Network Monitor 2.1
32802 There is not enough disk space to create the capture file with the size you have set.
32803 &Abort
32804 There are no more frames to cut
32805 The number must be between 1 and 72
32806 << Basic
32807 Unable to setup to transmit
32808 Transmit was successful
32809 Invalid Parameter
32810 The frame size is not valid. Please enter in a value between 8 and 65535
32811 Standard
32812 Please select a directory on a Non-Removable or Non-Remote drive.
32813 Frame %d not found
32814 Frame %d is too big
32815 MS Shell Dlg
32816 8
32817 The Execute Command Line checkbox was checked and no execution command was given.\nDo you wish to enter a command?
32818 You did not enter a pattern.\nDo you wish to enter a pattern?
32819 Pattern Match
32820 Total Events: %d
32821 Capture:
32822 Drive %s has insufficient space to allow Network Monitor to open a network
32823 Error in loading experts
32824 There are already experts running, please wait until they have completed before starting any others.
32825 This option is for advanced users only!\nTemporary capture files are created by Network Monitor during a capture, and they are removed after you explicitly save the data to a capture file or you exit Network Monitor. If you change the directory location for temporary capture files, it will not affect the default location for saved capture files.\n\nDo you still want to continue?
32826 You must enable at least one router discovery method
32827 The remote computer is no longer available
32828 Start
32829 Unable to connect to remote computer
32830 Invalid network
32831 Invalid network number
32832 There is not enough memory to open %s
32833 You can not have more than %d groups.
32834 You can not close the Display window while there are Experts running.\nPlease wait until they are finished.
32835 Expert Status
32836 Run %d: %s
32837 Inactive
32838 Starting
32839 Running,
32840 Problem!,
32841 Aborted.
32842 Done.
32843 UNKNOWN STATUS FLAG!!
32844 Failed Expert Status Call!!
32845 Run %d: %s, %d%% done
32846 Get Expert Info Failure
32847 Column Order
32848 The driver files have incompatible versions.
32849 Column Size
32850 %ls *** no description available ***
32851 Please enter an indent value less than %d.
32852 The temporary file that contained the captured data has been removed.\n
32853 11
32854 NET Dial-up Connection
32855 \\%hs\NET Dial-up Connection
32856 Version %d.%d (Build %d)
32857 Version %d.%d (Build %d: %s)
32858 *Any RAS Address
32859 Capture time RAS MAC Address
32860 The remote drive is not shared.\nPlease add file sharing to the remote temporary capture path.
32861 Version %hs (Build %d)
32862 The remote NPP is not connected to a network.
50000 Network Monitor
50001 Captures frames of network data to help you detect and analyze network problems
